Olvera is the arched security door designed to give any entrance a sumptuous and impeccable look
For sumptuous entrance halls, with a classic tradition. Olvera was coined for entrances that do not wish to waver a typical arched shape. A classic, contemporary and timeless.
If the building façade includes an entrance under a round arch, Olvera is just the right solution. This security door from the Scrigno Tech line meets both technical and styling requirements.
The door has an opening of 2300 mm in height on the keystone and 900 mm in width. The door can be customised with dedicated lines of finishes depending on the type of lock. The Nov'anta and Nov'color line of finish has a dedicated section with different designs and colours to satisfy the most demanding customers. The Olvera front door has a thermal transmittance value of 2.1 w/m²k and an acoustic insulation of 28 db.
Frame and hinges
The frame is in 20/10 thick sheet steel.
There are three tubular hinges.
Lock and accessories
The Olvera front door is fitted with European cylinder or double cylinder locks. As a general rule, the locks are supplied with an installer key and five user keys. Different shape and finish handles are also available. Indeed, you can choose from square or round handles and knobs and various-length grab bars.
|AS STANDARD (6+6)
|AS STANDARD (6+18)
|RESISTANCE TO WIND LOAD
|Specific painted 20/10 thick galvanised sheet steel counter frame (UNI EN 10142).
|Frame in pickled, pressure bent and welded sheet steel, painted on both sides in a colour similar to RAL 7043. Thickness of 20/10.
|Metal structure consisting of a galvanised pressure bent 15/10 thick steel sheet and stiffened by 2 reinforcement structures fully covering the internal part of the galvanised 15/10 thick sheet.
|Perimeter leaf profile in aluminium painted in a colour similar to RAL 7043, in which a special perimeter sealing strip is inserted in the dedicated seat.
|3 (three) hinges, adjustable in height, width and depth, ø 22 mm with cemented steel pin ø 14 mm rotating on a ball fitted with hinger cover caps the same colour as the frame.
|30/10 thick lock reinforcement plate.
|Cylinder lock with ø 18 mm central bolts protruding by 30 mm plus latch bolt, fitted with a mechanism with gears that considerably reduces noise and the effort required to operate the key compared to traditional locks.
|Omega reinforcement in 15/10 thick galvanised pressure bent sheet metal, insulated internally via the introduction of insulating material.
|Insulation material placed between the vertical Omega reinforcements and to cover the internal surface of the door.
|Internal covering, applied to the door via the introduction in the dedicated seat envisaged on the perimeter leaf profile.
|Side bolt with ø 18 mm deadbolt range of 30 mm.