Doing away with doorposts and edging trims, for a minimalist look

Scrigno Essential is designed to be applied on two different types of indoor partition walls: plaster and plasterboard. The plaster version is applied to 8/10/12 cm size perforated bricks, for an overall thickness of 105/125/145 mm; the plasterboard version on 75/100 mm profiles, for a total thickness of 100/125 mm or 125/150 in the event of a double slab. It is designed to house one or two sliding, rigid and flush doors, for a maximum weight of 120 kg. In width, the dimensions of the opening width range from 600 to 1200 mm for the single door model and from 1200 to 2400 mm for the double door model; in height, they reach up to 2030 mm. The internal space measures 54/69/89 mm and the maximum door thickness is 40/43 mm.

CASE
Made of Aluzinc, the case consists of various parts. The side members have been supplemented with a galvanised arc-welded plastering mesh, secured mechanically by special metal staples. The lower base is designed both for the floor mounting of the case, as well as to mount the door panel guide cylinder rod; the upper base has a zinc profile. In the plaster version, the rear is also fitted with clamps for improved anchoring of the case during installation. The front cover trim, in zinc, is fitted with storage pockets to house the alignment spacers and allow containment during installation during the plaster setting phase.

TRACK CROSSPIECE
Consisting of an extruded anodised aluminium profile, the track crosspiece is appropriately shaped to ensure perfect alignment of the hangers and the insertion of bare aluminium side profiles.

HANGER
The kit consists of a pair of hangers with four wheels each, covered in nylon, with a sealed ball bearing. The galvanised sheet metal suspension brackets have been appropriately shaped to allow the application of the door panel to the sliding system. The door panel guide cylinder rod is fitted with height-adjustment shims with respect to the surface of the finished floor.