Counter frame for automatic sliding doors

The door opens and shuts on its own. Indeed, the Scrigno Open 2.0 Kit to automate the sliding door can be installed on the Essential Pro counter frame, devised for the automatic opening of pocket sliding doors. This solution has no doorposts or edging trims. The counter frame is available in both masonry and plasterboard versions. The size of the opening width varies from 600 to 1200 mm in width for the plaster version, whereas it varies between 600 and 1000 mm for plasterboard walls. The standard height is 2000/2100 mm. For masonry walls, a non-standard height that can reach up to 2700 mm is also available. The maximum door thickness is 43 mm for masonry counter frames and 40 mm for plasterboard ones.

Case

The structure is in Aluzinc. In the masonry version, the case comes with a galvanised arc-welded plastering mesh, secured by specific metal staples. In the plasterboard version, horizontal reinforcements can be found on the structure to make it more rigid. Bare aluminium profiles are present at the front of the case. The upper base is designed for the attachment of the track crosspiece. The lower base is designed for the floor mounting of the case as well as to mount the door panel guide cylinder rod. Clamps or fixing brackets are fitted to the rear of the case to facilitate anchoring with masonry. The alignment spacers are fitted into dedicated pockets on the front cover trim. The fine fibre glass plastering mesh is supplied for positioning between the metal structure and the masonry.

The aluminium profiles, supplied with the case, can be painted in the same colour as the wall.

Track crosspiece

The track crosspiece is an extruded anodised aluminium profile shaped to ensure the perfect alignment of the hangers and the insertion of side profiles in bare aluminium.

Accessories

Essential Pro can be paired with the Scrigno Open 2.0 kit.